GB17498.1圖1慣性輪試驗指-技術規格及說明

GB17498.1圖1慣性輪試驗指-技術規格及說明

GB17498.1-2008固定式健身器材第1部分：通用安全要求和試驗方法

6.5 慣性輪試驗

在器材正常工作時,在驅動和傳動部件之間,從所有的方面插入試驗指(見圖 1)至任何易卡夾的部位。

距防護罩的邊界的較遠處，不必插入試驗指。

判定試驗指是否被卡夾。

BS EN ISO 20957-1:2013

Stationary training equipment

Part 1: General safety requirements and testmethods

6.8 Testing of flywheels

Insert the test finger (see Figure 1) from all sides into any possible entrapment point between the driveand transmission elements, while the equipment is in normal operation.

Do not introduce the test finger beyond the edge of the protective covering.

Determine whether the test finger becomes trapped.